Sbm Yapı, Tüneller Ve Madenler, Püskürtme Beton Uygulamaları, Makro Sentetik Fiber, Konut Zeminleri,

Beton Yollar, Prekast Uygulamalar, Endüstriyel Zeminler, Mikro Sentetik Fiber, Havalimanları,

Barajlar, Köprü ve Otoyollar, Saha Betonları,

TTCRN-A

Product Categories
Contact Us

They are long synthetic fibers produced from high molecular weight polymers such as polyolefin or polypropylene. It makes concrete more durable by intervening in micro-level structural defects.

These fibers extend the service life of concrete by increasing its resistance to early age cracks. By restricting the capillary movement of water, it reduces the water absorption capacity of concrete and increases its resistance to corrosive effects.

Compared to steel fibers, these synthetic fibers pose no risk of electrochemical corrosion. It also provides a more uniform distribution within the concrete and has the potential to reduce labor costs because it requires no special alignment or placement.

It is frequently preferred in non-structural and structural concrete applications with high performance requirements. These include structures in earthquake zones, high traffic floors, water structures and tunnels.

Integration of Macro Synthetic Fibers is simple. They are added directly to the concrete during the concrete batch process and are easily dispersed by mechanical mixing.

The fiber geometry is optimized according to the specific needs of the application. Hydrodynamic design and variant dimensions are used for optimal distribution and performance.

In general, the quality of the polymer used in the production of the fiber, fiber geometry and the total usage amount are the main factors affecting the cost.

When used in optimal proportions, these fibers do not adversely affect the workability of concrete, although in some cases the water/cement ratio may need to be slightly adjusted.

It shows a significant improvement in the tensile strength of concrete. While it increases impact and wear resistance, it may not have a direct effect on compressive strength.

The production of Macro Synthetic Fibers is more sustainable and energy efficient compared to steel fibers. No risk of corrosion extends the service life of structures and further reduces their environmental impact.

TTCRN-A

Product Description
TTCRN-A is an acrylic resin based concrete curing compound that forms a thin film layer on the concrete surface, preventing water loss through evaporation.

Areas of Application

  • In industrial buildings and airports for field concretes
  • For concrete curing operations on fresh poured concrete and all surface hardening applications
  • To facilitate curing where concrete curing is difficult
  • In art structures like retaining walls, culverts, etc.
  • On concrete roads and irrigation channels
  • In residential buildings

 

Advantages and Features

  • Provides a harder and dust-free surface
  • Allows savings from continuous watering, wet burlap, etc.
  • Provides resistance against freezing
  • Reduces the risk of plastic shrinkage cracks
  • Does not affect the setting properties of concrete
  • Does not contain solvents

 

Application Details, Recommendations, and Warnings

  • TTCRN-A is ready to use and should not be diluted with water. It should be thoroughly shaken before use.
  • TTCRN-A concrete curing compound is applied by spraying to create a thin film layer on fresh concrete to prevent rapid water loss. Care should be taken to avoid puddling on the surface. It can also be applied using a roller or brush.
  • Protect the concrete surface treated with TTCRN-A from rain until completely dry after application; do not walk on it or place equipment on it. The drying time after application is 1-2 hours (at 20°C).
  • The ambient temperature during application should be at least +5°C.

 

Recommended Application Dosage
Consumption may vary depending on the concrete surface temperature, wind speed, and humidity. The optimum application dosage should be determined through trials on a small area. Generally, 100-200 g/m² of application is sufficient.

Technical Specifications

 
Color and Form White liquid
Chemical Origin Acrylic-based emulsion
Density (kg/lt) 0.99 - 1.03 (at +20°C)

Equipment Cleaning
Equipment in contact with the product can be cleaned by washing with warm water or brushing.

Packaging and Storage
25 kg drum, 200 kg barrel, 1000 lt IBC tank

When stored correctly between +5°C and +35°C in its original, unopened, undamaged packaging, the product can be used for 12 months from the date of production.

Safety
During use, gloves, protective mask, and goggles should be worn. In case of contact with skin or eyes, rinse thoroughly with plenty of water. Detailed safety information is available in the product's SDS.

Protect from direct sunlight and frost.